Hilmar Kjartansson Danielsen

Hilmar Kjartansson Danielsen

Senior Researcher

DTU WIND ENERGY
Department of Wind Energy

Technical University of Denmark

Frederiksborgvej 399

Building 115, room S16

4000 Roskilde

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2019
 

3D X-ray computerized tomography of White Etching Cracks (WEC)

Danielsen, H. K. ; Carrasco, A. J. ; Fæster, S. ; Dahl, K. V. ; Guzmán, F. Gutiérrez ; Sauvage, P. ; Jacobs, G.
in: Materials Characterization, vol: 150, pages: 78-87

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.matchar.2019.01.032

2018
 

2D and 3D characterization of rolling contact fatigue cracks in a manganese steel crossing wing rail

Dhar, S. ; Danielsen, H. K. ; Fæster, S. ; Rasmussen, C. J. ; Juul Jensen, D.
part of: 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2018 , pages: 196-202 , 2019, TU Delft
Presented at:
11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems (CM2018)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2018

2017
  PDF

Analysis of bearing steel exposed to rolling contact fatigue

Hansen, K. T. ; Fæster, Søren ; Natarajan, Anand ; Mishin, Oleg ; Danielsen, Hilmar Kjartansson ; Juul Jensen, Dorte ; Klit, Peder
in: I O P Conference Series: Materials Science and Engineering, vol: 219
Presented at:
38th Risø International Symposium on Materials Science

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1088/1757-899X/219/1/012024

 

Multiscale characterization of White Etching Cracks (WEC) in a 100Cr6 bearing from a thrust bearing test rig

Danielsen, Hilmar Kjartansson ; Guzmán, F. Gutiérrez ; Dahl, Kristian Vinter ; Li, Y.J. ; Wu, J. ; Jacobs, G. ; Burghardt, G. ; Fæster, Søren ; Alimadadi, Hossein ; Goto, S. ; Raabe, D. ; Petrov, R.
in: Wear, vol: 370-371, pages: 73-82

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.wear.2016.11.016

  PDF

Role of copper on Laves phase morphology in 9-12%Cr steels

Danielsen, Hilmar Kjartansson ; Liu, Fang
in: I O P Conference Series: Materials Science and Engineering, vol: 219
Presented at:
38th Risø International Symposium on Materials Science

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1088/1757-899X/219/1/012015

 

Surface crack formation on rails at grinding induced martensite white etching layers

Rasmussen, Carsten Jørn ; Fæster, Søren ; Dhar, Somrita ; Quaade, Jesper Viggo ; Bini, Manuel ; Danielsen, Hilmar Kjartansson
in: Wear, vol: 384-385, pages: 8-14

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1016/j.wear.2017.04.014

  PDF

Synchrotron X-ray measurement of residual strain within the nose of a worn manganese steel railway crossing

Dhar, S. ; Zhang, Y. ; Xu, Ruichao ; Danielsen, Hilmar Kjartansson ; Juul Jensen, Dorte
in: I O P Conference Series: Materials Science and Engineering, vol: 219

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: https://doi.org/10.1088/1757-899X/219/1/012016

2016
  PDF

3D characterization of rolling contact fatigue crack networks

Jessop, Casey ; Ahlström, Johan ; Hammar, Lars ; Fæster, Søren ; Danielsen, Hilmar Kjartansson
in: Wear, vol: 366-367, pages: 392–400

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.1016/j.wear.2016.06.027

  PDF

Review of Z phase precipitation in 9–12 wt-%Cr steels

Danielsen, Hilmar Kjartansson
in: Materials Science and Technology, vol: 32, issue: 2, pages: 126-137

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: https://doi.org/10.1179/1743284715Y.0000000066